埃莎 Kurtz Ersa 热风回流炉 HOTFLOW 3/20
设备尺寸(W*D*H): 6590mmx1530mmx1450mm
设备重量: 3200kg
电源要求: 3x400v 5wire
气源要求: NA
设备简介:The new HOTFLOW is the third generation machine based on the proven &proprietary Multijet ERSA heat- ing technology.the R&D of this HOTFLOW series had its focus on improved heat transfer via a complere re- design of the process tunnel ,reduced energy an N2 consumption, improved cooling ,as well as optimized process control展开更多
设备参数
设备文档
配件清单
| Conveyor | |
|---|---|
working width | 50mm-536mm |
working width with PCB
center support | 50mm-536mm |
board clearance(standard) | +25/-35mm |
board clearance(standard) | +35/-35mm |
center support pin height | 15mm |
conveyor speed | 20mm-200cm/min |
conveyor height from floor | 820mm-980mm |
pin and chain conveyor | 3mm/5mm |
| Process zone | |
|---|---|
process length | 5150mm |
heating zone | 3700mm |
cooling zone | 1450mm |
infeed/outfeed zone | 700mm |
process chamber width | 700mm |
| Heating system | |
|---|---|
convection share | 100% |
gas flow/module | approx.500m³/h |
convection modules | 10top/3-10bottom |
preheating | 7top/7bottom(option) |
soldering zone | 3top/3bottom |
nominal rating per module | 3.3kw |
| cooling | |
|---|---|
cooling zone | ERSA Multijet system
4-stage version
and active water recooling |
coolant | water/R407C/air |
ambient temperature | max.32°C |
| Nitrogen option | |
|---|---|
gas injection | in prozess zones |
gas flow | 0-40m³/h |
pressure control | 6 bar |
| Exhaust rating | |
|---|---|
Exhaust stacks | 2stacks,150mm diameter each |
Exhaust volume per stack | 400m³/h |
Exhaust monitoring per stack | integrated |
| Permanent noise level | |
|---|---|
Permanent noise level | <70 dB |
加入供应商
暂无设备
Copyright ©2025 深圳市五一表面贴装技术有限公司
联系电话：15219506010
地址：广东省深圳市宝安区航城大道159号航城创新创业园B2栋101