埃莎 Kurtz Ersa 波峰焊 POWERFLOW
设备尺寸(W*D*H): 3900*1450*1580mm
设备重量: 1950kg
电源要求: 3 x 230/400 V, N, PE, 5-wire-system ± 10 %50 / 60 Hz 79 KW
气源要求: 6 bar approx. 5 - 10 m³/h
设备简介:The ERSA POWERFLOW represents a new future-oriented machine design consisting of different intelligent solutions adding value to the customer‘s production process. The POWERFLOW is based on a modular,flexible machine frame. Every module fully meets the requirements of lead-free soldering without any compromises. Flux, preheat and solder module can be configured individually so that board-specific properties can be considered.展开更多
设备参数
设备文档
配件清单
| Nitrogen: (optionally with inerted waves) | |
|---|---|
Inert gas pressure | 8 bar |
Recommended inert gas class | 99.999 % |
N2 consumption | approx. 5 - 10 m³/h |
| Environmental specification (factory) | |
|---|---|
Ambient temperature | 10 - 35 °C |
Humidity | 20 - 95 % (non-condensating) |
Permanent noise level | < 65 dBA |
| Flux module | |
|---|---|
Flux storage tank | 10 L |
Spray pressure | 0.9~1.5 bar |
| Bottom-side preheat module (type) | |
|---|---|
dynamic short-wave emitter Capacity | 10.4 kW (controlled) |
dynamic short-wave emitter Dimensions | length 600 mm / width 720 mm |
medium-wave emitter Capacity | 6 kW (closed loop controlled) |
medium-wave emitter Dimensions | length 600 mm / width 720 mm |
convection Capacity | 10.2 kW (closed loop controlled) |
convection Capacity Dimensions | length 600 mm / width 720 mm |
| Top-side preheat module | |
|---|---|
Standard | 1.4 m (2 x medium-wave 600 mm each,plus bridge heater 200 mm) |
Option | 2.0 m (standard + 1 x 600 mm)
2.6 m (standard + 2 x 600 mm) |
| Solder module | |
|---|---|
Type | wave solder module LM 10.1 |
Capacity | approx. 9.2 kW |
Solder volume | approx. 630 kg (when using
SnPb63/37 EQ), lead-free 525 kg |
Warm-up time | approx 5 h (260 °C) |
Solder temperature | max. 300 °C |
| Conveyor system | |
|---|---|
Type | finger-type conveyor or frame conveyor |
Frame conveyor | 330 or 400 mm |
Finger conveyor | 60~406 mm (16“) |
PCB length | 120~600 mm |
PCB top-side clearance | max. 80 mm |
Conveyor speed | 0.5~2.5 m/min |
Conveyor angle finger-type machine | 7° (fixed angle) |
Conveyor angle finger-type machine | 5° - 9° adjustable |
加入供应商
暂无设备
Copyright ©2025 深圳市五一表面贴装技术有限公司
联系电话：15219506010
地址：广东省深圳市宝安区航城大道159号航城创新创业园B2栋101