BTU 真空回流炉 PYRAMAX VACUUM 125N
设备尺寸(W*D*H): To be check
设备重量: To be check
电源要求: To be check
气源要求: To be check
设备简介:BTU 's Pyramax Vacuum 回流炉是制造商的首选，需要尽量减少焊料空隙。 焊接空隙可能是散热的关键因素的组件中的一个限寿命缺陷。 Pyramax Vacuum 已经证明其能力，以减少空隙水平远低于5%。 BTU 最初与通用高级流程实验室合作进行性能验证。 展开更多
设备参数
设备文档
配件清单
| 规格参数 | |
|---|---|
Model | Pyramax125N |
Convection Heated Zones | 10 top and bottom |
Vacuum Chamber Internal | 1 top radiant panel heater |
Vacuum Chamber Heat Assist | 2 heated convection zones |
Process Chamber | 350°C |
Vacuum Chamber | 300°C |
Conveyor System | edge rail support |
Vacuum Chamber Zones | 1 zone |
Vacuum Chamber Size | up to 457 x 457mm (18 x 18 inches) PCB |
Atmosphere | nitrogen / air |
Max PCB size | 457x457mm |
| Vacuum Specifications: | |
|---|---|
Vacuum Level | 20 Torr (1 Torr optional) |
Pump Down Time | 15-20 seconds (typica) |
Hold Time | 10-60 seconds |
Refill Time | 15 seconds (typical) |
| Key benefits | ||
|---|---|---|
Solder voiding to<5% | Thermal uniformity +/-2°C | Superior profile control |
Full MES integration | Lowest liquidus time |
| Key features | ||
|---|---|---|
Recipe controlled vacuum parameters | Bell jar vacuum chamber design | Vacuum chamber process heating |
Easy maintenance access | Pass-thru mode | Profile guardian ready |
加入供应商
暂无设备
Copyright ©2025 深圳市五一表面贴装技术有限公司
联系电话：0755-27820151
地址：广东省深圳市宝安区航城大道159号航城创新创业园a1栋510