Rehm 锐德 真空回流炉 VisionXS
设备尺寸(W*D*H): 4290x1466x1439mm
设备重量: 约:2100 kg
电源要求: To be check
气源要求: N/A
设备简介:VisionXS The flexible Reflow Soldering System with futures As a co-founder of modern ReflowConvection-Soldering Systems the company Rehm has been established successfully since 1990 in the national market as well as worldwide. The know-how and experience in reflow technology of many years is now integrated in the VisionXS-series. Optimized for customer requirements the VisionXS stands for productivity and flexibility.展开更多
设备参数
设备文档
配件清单
| PROCESS CHAMBER HEATING | |
|---|---|
Length | 2100mm |
Quantity of preheating zones | 4 |
Length of preheating zones | 1400mm |
Quantity of peak zones | 2 |
Length of peak zones | 700mm |
Max. permissible soldering temperature : preheating zones | 300°C |
Max. permissible soldering temperature : peak zones | 350°C |
Heat transfer through | Forced convection |
Gas circulation per heating zone | max.350m3/h |
Warm up time | ca.30min/approx30min |
Cross profile (Delta T = Tmax _ Tmin) | ±2,5Kelvin |
type | type 422 |
| COOLING ZONE | |
|---|---|
Length | 700mm |
| MESH BELT CONVEYOR | |
|---|---|
Width | 461mm |
| PIN CHAIN CONVEYOR | |
|---|---|
Transport Level | 900±75mm |
Width, single conveyor ±0,5 mm / without CBS | 50–400mm;
Option1:50–460mm;
Option2:50–508mm |
Width, single conveyor ±0,5 mm / with CBS | 65–400mm;
Option1:100– 460mm;
Option2:140– 508mm |
Tolerance conveyor speed (1 % per 1800 mm/min) | <=18mm/min |
| CENTRE SUPPORT | |
|---|---|
Lash heigt | Lash stand off:16mm |
Distance to fixed rail lowered | 20mm |
Center Support active Width | 50–340mm;
Option1:50 –380mm;
Option2:50–390mm |
CBS Low (Parking Position) | 14mm |
| OPERATING DATA | |
|---|---|
Maximum noise level | 75dBA |
Room temperature | between15°Cand32 °C |
Humidity | between30%and75% |
Oxygen of peak zones | <100ppm |
| VOLTAGE SUPPLY CONSUMPTION | |
|---|---|
Energy consumptions standby-mode | 6KW |
Connected load | 41KW |
Operating capacity | 7,5KW |
| COOLING WATER AT EXTERNAL COOLING | |
|---|---|
Connection | M28x1,5(22mmCu Rohr/0,87in Cu Tube) |
Cooling water flow | between10–20l/min (according to temperature) |
Operating pressure | min.2bar–max.5ba |
Differential pressure between forward and return run | min.0,5bar |
| NITROGEN SUPPLY | |
|---|---|
Connection | M1x1(12mmCu Rohr)/M 16×1(12mm/0,472in Cu-Tube) |
Nitrogen supply pressure | min.7bar–max.10 bar |
Operating pressure | 5bar |
Nitrogen consumption single conveyor at <200 ppm in peak
max. 200 mm at min. 1 PCB gap | ca.19m3/h |
Nitrogen consumption with N2-control in Standby Mode 200 mm transport width. | ca.16m3/h |
| EXHAUST PROCESS | |
|---|---|
Exhaust socket: diameter | 2x100mm Ein-bzw. Auslauf/2x3,9in In-and Outlet |
Exhaust at min. 5 mbar underpressure | 2x200m3/h |
Exhaust temperature | <50°C |
| System configuration VisionX-Series | |
|---|---|
Single lane | Cold condensation with cooler/filter units only nitro systems |
| System configuration VisionX-Series optiona | |
|---|---|
Mesh belt | Product management |
Traceability packages | Process interlock |
ProCap | MES-Option ROI |
Software control for fan speed regulation |
加入供应商
暂无设备
Copyright ©2025 深圳市五一表面贴装技术有限公司
联系电话：15219506010
地址：广东省深圳市宝安区航城大道159号航城创新创业园B2栋101