锐德 Rehm 热风胶水固化炉 RDS Magazintrockner
设备尺寸(W*D*H): 3625x1355x1795 mm
设备重量: To be check
电源要求: To be check
气源要求: 5 mbar
设备简介:The new RDS magazine dryer by Rehm is an optimum system with inert gas operating for tempering power modules. The system can achieve temperatures of up to 300°C and residual oxygen values of less than 5000ppm O2 and is impressive thanks to its innovative air lock technology and good thermal insulation, which ensures stable height profiles during the process. 展开更多
设备参数
设备文档
配件清单
| Conveyor | |
|---|---|
Conveyor height | 950 mm ± 50 mm |
Maximum magazine size | H460xL240xD240mm |
Cycle time | 3 min up to 24 hours |
| Process parameters | |
|---|---|
T | max 300 °C |
Residual oxygen values | <5000 ppm O2 |
Exhaust volume flow rate: | 400 m³/h |
| 1,Loading |
|---|
| Loading of the magazines by hand or using a handling system in the goods carriers with exact positioning |
| 2. Lifting transport/Inlet |
|---|
| A lifting mechanism feeds the magazines to the process chamber transporte |
| 3. N2 tunnel |
|---|
| A low level of residual oxygen in the N2 tunnel is guaranteed due to the lock system. Compartments eliminate air leakage. |
| 4. Pre-heating/Heating |
|---|
| The four heat zones guarantee steady heating of all the components in the magazine at the lowest . |
| 5. Cooling |
|---|
| Optimal thermal separation is achieved through a compartment between the heat and cooling zone. Cooling zone temperatures of 20 °C are possible. |
| 6. N2 tunnel |
|---|
| The locks in the outlet area ensure a lower ppm value in the process chamber and a stable elevation profile. |
| 7. Lifting transport/Outlet |
|---|
| The locks in the outlet area ensure a lower ppm value in the process chamber and a stable elevation profile. |
| 8. Unloading |
|---|
| Manual or automated unloading of the magazine. |
加入供应商
暂无设备
Copyright ©2025 深圳市五一表面贴装技术有限公司
联系电话：0755-27820151
地址：广东省深圳市宝安区航城大道159号航城创新创业园a1栋510