Cyberoptics SMT自动光学检测机SQ 3000 D ™
设备尺寸(W*D*H): L1700.5×W1620×H1520mm
设备重量: 1596kg
电源要求: AC100~120V/220~240V 50/60Hz
气源要求: 0.55~0.69MPa, 113L/min
设备简介:CyberOptics(美国,现属Nordson)SQ3000-D双轨单传感器3D AOI:双轨模式最大板510×320mm,切单轨可测510×510mm大板,两轨可同步或异步运行不同程序;MRS传感器可选标准/高速/高分辨/超高分辨。平台原简介误写为SQ3000-DD(双轨双传感器),已更正为D型。官方未单独公布D型尺寸与重量,1700.5×1620×1520mm、约1596kg暂沿用平台记录。展开更多
设备参数
设备文档
配件清单
设备参数
| 规格参数 | ||
|---|---|---|
Inspection Capabilities | Inspection Speed | Minimum Component Size |
Standard MRS Sensor | 40cm2/sec (2D+3D) | 0402mm(01005 inch) |
High-Speed MRS Sensor | 50cm2/sec (2D+3D) | 0402mm(01005 inch) |
High-Resolution MRS Sensor | 20cm2/sec (2D+3D) | 0201mm(008004 inch) |
Ultra-High Resolution MRS Sensor | 15cm2/sec (2D+3D) | 0201mm(008004 inch) |
| 规格参数 | ||
|---|---|---|
Inspection Capabilities | Z Height Measurement Range | Field of View (FOV) |
Standard MRS Sensor | 6mm at spec, 24mm capability | 36x30mm |
High-Speed MRS Sensor | 6mm at spec, 24mm capability | 36x36mm |
High-Resolution MRS Sensor | 3mm at spec, 8mm capability | 26x26mm |
Ultra-High Resolution MRS Sensor | 3mm at spec, 8mm capability | 21x21mm |
| 规格参数 | |
|---|---|
Inspection Capabilities | Resolution |
Standard MRS Sensor | Sub 10µm |
High-Speed MRS Sensor | Sub 10µm |
High-Resolution MRS Sensor | 7µm |
Ultra-High Resolution MRS Sensor | 7µm |
| PCB Size (Max.) | ||
|---|---|---|
SQ3000 DD | Single Lane:510x510mm
(20x20 inch) | Dual Lane:350x320mm(13.7x12.5inch) |
SQ3000 D | Single Lane:510x510mm
(20x20inch) | Dual Lane:510x320mm(20x12.5inch) |
| 规格参数 | |
|---|---|
Component Height Clearance | Top:50mm ; Bottom:30mm |
PCB Thickness | 0.3-5mm |
Component Types Inspected | Standard SMT (chips, J-lead, gull-wing, BGA, etc.), through-hole, odd-form, clips, connectors, header pins, and more |
Component Defects | Missing, polarity, tombstone, billboard, flipped, wrong part, gross body and lead damage, and more |
Solder Joint and Other Defects | Gold finger contamination, excess solder, insufficient solder, bridging, through-hole pins |
3D Measurement Inspection | Lifted Lead, package coplanarity, polarity dimple and chamfer identification |
Measurement Gage R&R | <10%@±3σ(±80µm process tolerance) |
Z Height Accuracy | 1µm on certification target |
| Vision System & Technology | |
|---|---|
Imagers | Multi-3D sensors |
Image Processing | Autonomous Image Interpretation (AI2) Technology, Coplanarity and Lead Measurement |
Programming Time | <13minutes (for established libraries) |
CAD Import | Any column-separated text file with ref designator, XY, Angle, Part no info;
Valor process preparation |
Machine Interface | SMEMA, RS232 and Ethernet |
| Options | |
|---|---|
Barcode Reader | Rework station |
SPC Software | Alignment Target |
Standard SQ3000 and SQ3000 X models available |
