™(在线)SPI锡膏检查机SE500超
设备尺寸(W*D*H): L1270×W1000×H1390mm
设备重量: 854.5kg
电源要求: AC100–130V/220–240V 50/60Hz 单相
气源要求: 0.55–0.69MPa, 113L/min
设备简介:■CyberOptics(现属Nordson)SE500ULTRA™为在线3D锡膏检测(SPI)系统,采用免校准超快传感器与“all-in-one”一次扫描(基准点、条码、高度),速度较前代提升约30%。 ■支持双照明传感器、MicroPad选件,可测小至100µm焊盘;支持闭环印刷机反馈与贴片机前馈。 ■外形为H139×W100×D127cm,按L×W×H记为L1270×W1000×H1390mm。展开更多
设备参数
设备文档
配件清单
设备参数
| System Specifications | |
|---|---|
Panel Size Capacity (Max) | 510x510mm(20.0x20.0inch) |
Panel Size Capacity (Min) | 50x50mm(2.0x2.0inch) |
Maximum Panel Weight | 3.0kg(6.6lbs) |
Board Thickness | 0.3mm to 5.0mm(0.01inch to 0.2inch) |
Board Edge Clearance | Top:2.5mm(0.10inch); Bottom:3.0mm(0.12inch) |
Component Clearance | Top (above belt):20.1mm(0.78inch);
Bottom:25.4mm(1.0inch) |
Conveyor Speed Range | 150-450mm/sec(5.9-17.7inch/sec) |
Conveyor Adjustment | Automatic |
| Functional Specifications | |
|---|---|
Maximum Inspection Area | 508x503mm(20.0x19.8inch) |
Field-of-View (FOV) | 32x32mm(1.26x1.26inch) |
X and Y Pixel Size | High Resolution:15µm(0.6mils); High Speed:30µm(1.2mils) |
Paste Height Range | 50-500µm(2-20mils) |
Height Resolution | 0.2µm(0.008mils) |
Maximum Board Warp | <2% of PCB diagonals or max. of 6.35mm(0.25inch) total |
Maximum Pad Size in FOV | 15x15mm(0.6x0.6inch) |
Measurement Types | Height, Area, Volume, Registration, Bridge Detection, Defect Review |
Machine Interface | SMEMA, RS232 & Ethernet |
| Performance Specifications | |
|---|---|
Inspection Speed @30um | Up to 210cm²/sec (32.5in²/sec) |
Inspection Speed @15um | 80cm²/sec (12.3in²/sec) |
Fiducial, Barcode and Skip Mark | All-in-one scan |
Height Accuracy | 2µm on a Certification Target |
Gage R&R | <<10%, 6σ |
| Options | |
|---|---|
SPC software | Barcode Readers (1D/2D) |
Programming Software: ePM-SPI/AOI & GC-PowerPlace, | Offline Defect Review |
Certification Target |
