DCT PCB，PCBA清洗机InJet ® 388 CD

设备尺寸(W*D*H): L1360×W1050×H2400mm

设备重量: 420kg

电源要求: AC400V 50Hz 3相+N+PE

气源要求: 0.45–0.6MPa

设备简介:DCT Cleaning Systems(捷克)InJet 388系列入门单腔机，垂直Spray-In-Air喷淋减少阴影效应，整机带脚轮可置于产线旁，用于钢网、刮刀、单面误印板及PumpPrint的锡膏清洗。平台brand字段为空，厂商应为DCT；尺寸1050×1360×2400mm为厂商W×L×H，按长×宽×高重排为L1360×W1050×H2400mm；气源原写4.5–6Bar，换算为0.45–0.6MPa；净重420kg与官方一致。展开更多

设备参数

设备文档

配件清单

TECHNICAL PARAMETERS
Ø energy consumption per cycle	1,5 kWh
Cleaning fluid consumption per cycle	0,05 – 0,2L
Compressed air consumption per cycle	900L/ cycle
Max. dimensions of the cleaned parts	190x800x760mm
Max. dimensions of the cleaned part with used air knife	100x800x760mm
Exchangeable mechanical filter of cleaning fluid	5–200 μm
Operating pressures	1,5 – 2,8 Bar
Cleaning fluid flow rate	200L / min
Temperature range setting of the cleaning fluid	From ambient temperature to 60°C
Conductivity range settings of the rinsing fluid in the tanks	0 – 2000 μS/cm optional
Temperature range setting of the drying	From ambient temperature to 80°C
Noise level	< 70 dB
Device controI	PLC+4,3“ touchscreen
Volume of the storage tank	75L

INSTALLATION REQUIREMENTS
Pmax	7,5 kW
Connection to central air pressure	Pipe Ø 6 mm
Compressed air quality	3. Class
Exhaust pipe diameter	Ø 100 mm
Exhaust pipe capacity	380 m³/h
Minimum liquid for first run	1x50L
Service space required around the device	600 mm