InJet ® 388 CRD
设备尺寸(W*D*H): L1390×W1200×H2400mm
设备重量: 450kg
电源要求: AC400V 50Hz 3相+N+PE
气源要求: 0.45–0.6MPa
设备简介:DCT InJet 388 CRD为单腔CRD机型，除钢网、PumpPrint、刮刀与误印板上的锡膏/SMT胶水外，还可清洗PCB并去除固化三防漆。平台尺寸1200×1390×2400mm系厂商W×L×H，已重排为L1390×W1200×H2400mm；净重450kg与2019版官方TDS一致；DCT另有新版规格书标1120×1360×2100mm/420kg，与平台记录冲突且无版本说明，暂保留现值，待核实。展开更多
设备参数
设备文档
配件清单
设备参数
| TECHNICAL PARAMETERS | |
|---|---|
Ø energy consumption per cycle | 2,5 kWh |
Cleaning and rinsing fluid
consumption per cycle | 0,05 – 0,3L |
Compressed air consumption
per cycle | 900L/cycle |
Max. dimensions of the cleaned parts | 190x800x760mm |
Max. dimensions of the cleaned parts with used air knife | 100x800x760mm |
Exchangeable mechanical filter of cleaning and rinsing fluid | 5 – 200μm |
Operating pressures | cleaning:1,5–2,8Bar,
rinsing:0,3–1,5Bar |
Cleaning fluid flow rate | 200L/min |
Temperature range setting of the cleaning and rinsing fluid | From ambient temperature to 60°C |
Conductivity range settings of the rinsing fluid in the tanks | 0–2000 μS/cm optional |
Temperature range setting of the drying | From ambient temperature to 80°C |
Noise level | < 70 dB |
Cleaning system control | PLC+8,4“ touchscreen |
Volume of the storage tanks | 60L |
| INSTALLATION REQUIREMENTS | |
|---|---|
Pmax | 12 kW |
Compressed air connection | Pipe Ø 6 mm |
Compressed air quality | 3. Class |
Exhaust pipe diameter | Ø 100 mm |
Exhaust pipe capacity | 380m³/h |
Minimum liquid for first run | 2 x 50L |
Service space required around the device | 600 mm |