DCT PCB，PCBA清洗机InJet ® 388 CRRD Combo

设备尺寸(W*D*H): L1390×W1410×H2400mm

设备重量: 560kg

电源要求: AC400V 50Hz 3相+N+PE

气源要求: 0.45–0.6MPa

设备简介:DCT InJet 388 CRRD 1PR「Combo」，在CRD基础上增加预漂洗回路，兼顾焊后PCBA精密清洗与钢网/刮刀/误印板清洗，并可去除固化三防漆；每8h钢网27片、欧标小板384片。尺寸1410×1390×2400mm为厂商W×L×H，已重排为L1390×W1410×H2400mm；净重560kg与官方TDS一致。展开更多

设备参数

设备文档

配件清单

TECHNICAL PARAMETERS
Ø energy consumption per cycle	1,65 kWh
Cleaning and rinsing fluid consumption per cycle	0,05–0,3L
Compressed air consumption per cycle	900L/ cycle
Max. dimensions of the cleaned parts	190x800x760mm
Max. dimensions of the cleaned part with used air knife	100x800x760mm
Exchangeable mechanical filter of cleaning and rinsing fluid	5 – 200μm
Spraying pressure / 45°C / 113°F	2,2 Bar
Range pressure–cleaning/45°C/ 113°F	0,9 – 2,8 Bar
Range pressure–pre rinse / 45°C / 113°F	0,0 – 1,5 Bar
Cleaning fluid flow rate	200L/min
Temperature range setting of the cleaning and rinsing fluid	From ambient temperature to 60°C
Conductivity range settings of the rinsing fluid in the tanks	0 – 2000 μS/cm optional
Temperature range setting of the drying	From ambient temperature to 80°C
Noise level	<70dB
Device control	PLC+8,4“ touchscreen
Volume of the storage tanks	60L

INSTALLATION REQUIREMENTS
Pmax	13 kW
Compressed air connection	Pipe Ø 6 mm
Compressed air quality	3. Class
Exhaust pipe diameter	Ø 100 mm
Exhaust pipe capacity	380m³/h
Minimum liquid for first run	3 x 50L
Service space required around the device	600mm