DCT电路板®、清洗机InJet 388双卡香肠狗
设备尺寸(W*D*H): L2500×W1200×H2150mm
设备重量: 750kg
电源要求: AC400V 50Hz 3相+N+PE
气源要求: 0.45–0.6MPa
设备简介:DCT InJet 388 TWIN CRD「Sausage dog」(香肠狗)为加长型双腔机，入口腔清洗、中央传输区过渡、出口腔漂洗并干燥，两腔可并行，产能高于单腔机且降低交叉污染；主要清洗钢网、SMT胶水、PumpPrint、刮刀与误印板。尺寸1200×2500×2150mm为厂商W×L×H，已重排为L2500×W1200×H2150mm；净重750kg与官方TDS一致。展开更多
设备参数
设备文档
配件清单
设备参数
| TECHNICAL PARAMETERS | |
|---|---|
Ø energy consumption per cycle | 1,54kWh |
Cleaning and rinsing fluid consumption per cycle | 0,05 – 0,3L |
Compressed air consumption per cycle | 1L/ 5 Bar |
Max. dimensions of the cleaned parts | 100x810x740mm |
Exchangeable mechanical filter
of cleaning and rinsing fluid | 5–200 μm |
Operating pressures | cleaning:1,5–2,8Bar,
rinsing1:0,1–2Bar |
Cleaning fluid flow rate | 200L/min |
Temperature range setting of
the cleaning and rinsing fluid | From ambient temperature to 60°C |
Conductivity range settings of
the rinsing fluid in the tanks | 0 – 2000 μS/cm optional |
Temperature range setting of the drying | From ambient temperature to 80°C |
Noise level | < 70 dB |
Device contro | PLC+8,4“ touchscreen |
Volume of the storage tanks | 80L |
| INSTALLATION REQUIREMENTS | |
|---|---|
Pmax | 16 kW |
Compressed air connection | Pipe Ø 6 mm and Ø 10 mm |
Compressed air quality | 3. Class |
Exhaust pipe diameter | 2xØ100 mm |
Exhaust pipe capacity | 580m³/h |
Minimum liquid for first run | 2x75L |
Service space required around the device | 600 mm |