DCT印刷电路板®、清洗机InJet 388双卡
设备尺寸(W*D*H): L2500×W1200×H2150mm
设备重量: 800kg
电源要求: AC400V 50Hz 3相+N+PE
气源要求: 0.45–0.6MPa
设备简介:DCT InJet 388 TWIN CRRD「Sausage dog」，双碳+树脂过滤可将预漂洗与终漂洗DI水离子污染控制在1μS/cm，适合焊后PCBA大批量精密清洗，也可清洗钢网、PumpPrint、刮刀与误印板，4轮脚轮便于产线就位。尺寸1200×2500×2150mm为厂商W×L×H，已重排为L2500×W1200×H2150mm；净重800kg与官方TDS一致。展开更多
设备参数
设备文档
配件清单
设备参数
| TECHNICAL PARAMETERS | |
|---|---|
Ø energy consumption per cycle | 1,54 kWh |
Cleaning and rinsing fluid consumption per cycle | 0,05 – 0,3L |
Compressed air consumption per cycle | 1L/ 5 Bar |
Max. dimensions of the cleaned parts | 100x810x740mm |
Exchangeable mechanical filter of cleaning and rinsing fluid | 5 – 200 μm |
Spraying pressure/45°C/113°F | 2,3 Bar |
Range pressure–cleaning/
45°C/113°F | 0,7 – 3Bar |
Range pressure–pre rinsing/
45°C/113°F | 0,8 – 2Bar |
Range pressure – rinsing/45°C/
113°F | 0,1 – 2,8Bar |
Cleaning fluid flow rate | 200L/min |
Temperature range setting of the cleaning and rinsing fluid | From ambient temperature to 60°C |
Conductivity range settings of the rinsing fluid in the tanks | 0–2000μS/cm optional |
Temperature range setting of the drying | From ambient temperature to 80°C |
Noise level | < 70dB |
Device control | PLC+8,4“ touchscreen |
Volume of the storage tanks | 80L |
| INSTALLATION REQUIREMENTS | |
|---|---|
Pmax | 16 kW |
Compressed air connection | Pipe Ø 6 mm and Ø 10 mm |
Compressed air quality | 3. Class |
Exhaust pipe diameter | 2 x Ø 100 mm |
Exhaust pipe capacity | 580m³/h |
Air consumption - air knife | 37m³/h |
Minimum liquid for first run | 3x75L |
Service space required around the device | 600mm |