DCT钢板清洗机InJet ® 388 Triple CRRD

设备尺寸(W*D*H): L3200×W1205×H1860mm

设备重量: 890kg

电源要求: AC400V 50Hz 3相+N+PE

气源要求: 0.45–0.6MPa

设备简介:DCT InJet 388 TRIPLE CRRD为三腔串联高产能机型，入口腔清洗、中央腔一次漂洗、出口腔终漂洗并干燥，三腔并行以提升产能并减少交叉污染；主要用于焊后PCBA精密清洗，也可清洗钢网、PumpPrint与刮刀，每8h钢网48片、欧标小板768片。尺寸1205×3200×1860mm为厂商W×L×H，已重排为L3200×W1205×H1860mm；净重890kg与官方TDS一致。展开更多

设备参数

设备文档

配件清单

TECHNICAL PARAMETERS
Ø energy consumption per cycle	1,65 kWh
Cleaning and rinsing fluid consumption per cycle	0,05 – 0,3L
Compressed air consumption per cycle	2L/5 Bar
Max. dimensions of the cleaned parts	100x810x740mm
Exchangeable mechanical filter of cleaning and rinsing fluid	5–200μm
Operating pressure / 45 °C / 113 °F Cleaning	0,3–2,8 bar
Operating pressure / 45 °C / 113 °F Rinsing	0,0–1,5 bar
Cleaning fluid flow rate	200L/ min
Temperature range setting of the cleaning and rinsing fluid	From ambient temperature to 60°C
Conductivity range settings of the rinsing fluid in the tanks	0–2000μS/cm optional
Temperature range setting of the drying	From ambient temperature to 80°C
Noise level	< 70dB
Device control	PLC+8,4“ touchscreen
Volume of the storage tanks	75L

INSTALLATION REQUIREMENTS
Pmax	16 kW
Compressed air connection	Pipe Ø 6 mm and Ø 10 mm
Compressed air quality	3. Class
Exhaust pipe diameter	3x Ø 100mm
Exhaust pipe capacity	580m³/h
Minimum liquid for first run	3x75L
Service space required around the device	600 mm