DCT PCB，PCBA清洗机InJet ® 388 Double Triple CRRD
设备尺寸(W*D*H): L3200×W1710×H1930mm
设备重量: 1500kg
电源要求: AC400V 50Hz 3相+N+PE
气源要求: 0.45–0.6MPa
设备简介:捷克DCT（dct.cleaning）InJet 388 DOUBLE TRIPLE CRRD，为388系列中产能最强的垂直喷淋机型，约为388 TRIPLE CRRD的两倍；3个工艺腔可并行（清洗—预漂洗/漂洗—终漂洗+干燥），用于钢网、误印板、刮刀、PumpPrint及PCBA助焊剂清洗，100%闭循环，PLC+8.4″触摸屏；电源400V 63A，Pmax 45kW。展开更多
设备参数
设备文档
配件清单
设备参数
| TECHNICAL PARAMETERS | |
|---|---|
Ø energy consumption per cycle | 3,14 kWh |
Cleaning and rinsing fluid consumption per cycle | 0,05 – 0,3L |
Compressed air consumption per cycle | 1L/5 Bar |
Max. dimensions of the cleaned parts | 100x810x740mm |
Exchangeable mechanical filter of cleaning and rinsing fluid | 5–200μm |
Spraying pressure–cleaning/ 45°C/113°F | 1,6 Bar |
Range presssure–cleaning/45°C /113°F | 0,3–2,8Bar |
Range pressure–pre rinsing/ 45°C/113°F | 0,0–1,5Bar |
Range presssure–rinsing/45°C/ 113°F | 0,1 – 1,5 Bar |
Cleaning fluid flow rate | 200L/min |
Temperature range setting of the cleaning and rinsing fluid | From ambient temperature to 60°C |
Conductivity range settings of the rinsing fluid in the tanks. | 0–2000μS/cm optional |
Temperature range setting of the drying | From ambient temperature to 80°C |
Noise level | < 70 dB |
Device control | PLC+8,4“ touchscreen |
Volume of the storage tanks | 150L |
| INSTALLATION REQUIREMENTS | |
|---|---|
Pmax | 45 kW |
Compressed air connection | Pipe Ø 6 mm and 2x Ø 10mm |
Compressed air quality | 3. Class |
Exhaust pipe diameter | 3xØ 100mm |
Exhaust pipe capacity | 580m³/h |
Air consumption - air knife | 37m³/h |
Minimum liquid for first run | 3 x 75L |
Service space required around the device | 600 mm |