DCT印刷电路板®888CRD 1F、印刷电路板清洗机InJet
设备尺寸(W*D*H): L1400×W1620×H2350mm
设备重量: 660kg
电源要求: AC400V 50Hz 三相5线(3+N+PE)
气源要求: 0.45–0.6MPa
设备简介:丹麦DCT出品的InJet® 888系列水平喷淋（Spray-In-Air）全自动清洗机，CRD-1F为单层腔体，主要用于过炉载具/焊接治具的助焊剂清除及焊接设备部件维护清洗，亦可清洗PCBA、钢网与误印板，100%闭路设计，清洗、漂洗、干燥一体自动完成，装机功率Pmax 13kW。平台型号“InJet® 888 CRD 1F”官方写法为“InJet® 888 CRD-1F”；气源原记录“4,5–6Bar”为欧式小数逗号，即4.5–6bar，折合0.45–0.6MPa。展开更多
设备参数
设备文档
配件清单
设备参数
| TECHNICAL PARAMETERS | |
|---|---|
Ø energy consumption per cycle | 3,3 kWh |
Cleaning and rinsing fluid consumption per cycle | 0,2-0,5L |
Compressed air consumption per cycle | 1500L/cycle |
Max. dimensions of the cleaned parts | 850x800x600mm |
Exchangeable mechanical filter
of cleaning and rinsing fluid | 5 – 200μm |
Operating pressures frequency converter | 2,4 Bar |
Cleaning fluid flow rate | 210L/min |
Temperature range setting of the cleaning and rinsing fluid | From ambient temperature to 60°C |
Conductivity range settings of the rinsing fluid in the tanks | 0–2000μS/cm optional |
Temperature range setting of the drying | From ambient temperature to 80°C |
Noise level | < 70dB |
Device control | PLC+8,4“ touchscreen |
Volume of the storage tanks | 85L |
| INSTALLATION REQUIREMENTS | |
|---|---|
Pmax | 13kW |
Compressed air connection | Pipe Ø 6mm |
Compressed air quality | 3. Class |
Exhaust pipe diameter | Ø 150mm |
Exhaust pipe capacity | 380m³/h |
Minimum liquid for first run | 2x75L |
Service space required around the device | 600mm |