DCT PCB，PCBA清洗机InJet ® 888 CRD 2F
设备尺寸(W*D*H): L1350×W1620×H2350mm
设备重量: 680kg
电源要求: AC400V 50Hz 三相5线(3+N+PE)
气源要求: 0.45–0.6MPa
设备简介:丹麦DCT InJet® 888系列全自动闭路清洗机，CRD-2F为双层方案，主要清除过炉载具及焊接设备部件的助焊剂残留，拆下旋转臂即可转为单层清洗大件，兼容PCBA、钢网、误印板清洗，装机功率Pmax 12kW。平台型号“InJet® 888 CRD 2F”官方写法为“InJet® 888 CRD-2F”；尺寸原值“1620X 1350X2350mm”格式不规范，按厂方 宽1620×长1350×高2350mm 规范为L×W×H。展开更多
设备参数
设备文档
配件清单
设备参数
| TECHNICAL PARAMETERS | |
|---|---|
Ø energy consumption per cycle | 3,3 kWh |
Cleaning and rinsing fluid consumption per cycle | 0,2–0,5L |
Compressed air consumption per cycle | 1200L/cycle/4,5bar |
Max. dimensions of the cleaned parts | 850x800x600mm |
Exchangeable mechanical filter of cleaning and rinsing fluid | 5–200μm |
Operating pressures frequency converter | 1,8Bar |
Cleaning fluid flow rate | 210L/min |
Temperature range setting of the cleaning and rinsing fluid | From ambient temperature to 60°C |
Conductivity range settings of the rinsing fluid in the tanks. | 0–2000μS/cm optional |
Temperature range setting of the drying | From ambient temperature to 80°C |
Noise level | < 70dB |
Device control | PLC+8,4“ touchscreen |
Volume of the storage tanks | 85L |
| INSTALLATION REQUIREMENTS | |
|---|---|
Pmax | 12 kW |
Compressed air connection | Pipe Ø 6mm, Ø 10mm |
Compressed air quality | 3. Class |
Exhaust pipe diameter | Ø 150mm |
Exhaust pipe capacity | 380m³/h |
Minimum liquid for first run | 2x75L |
Service space required around the device | 600mm |