DCT PCB，PCBA清洗机InJet ® 888 CRRD 1F
设备尺寸(W*D*H): L1400×W1620×H2350mm
设备重量: 775kg
电源要求: AC400V 50Hz 三相5线(3+N+PE)
气源要求: 0.45–0.6MPa
设备简介:丹麦DCT InJet® 888 CRRD-1F 为带预漂洗段的单层全自动闭路清洗机，主要用于PCBA回流后助焊剂清除，可同时放入钢网或误印板清洗，100%闭路设计，清洗、漂洗、干燥一腔完成，装机功率Pmax 14kW。平台型号“InJet® 888 CRRD 1F”官方写法为“InJet® 888 CRRD-1F”；尺寸、重量、电压、气源(4.5–6bar=0.45–0.6MPa)经代理TDS核对与原记录一致，仅作单位与格式规范。展开更多
设备参数
设备文档
配件清单
设备参数
| TECHNICAL PARAMETERS | |
|---|---|
Ø energy consumption per cycle | 3,3 kWh |
Cleaning and rinsing fluid consumption per cycle | 0,2–0,5L |
Compressed air consumption per cycle | 1500L/cycle |
Max. dimensions of the cleaned parts | 850x800x600mm |
Exchangeable mechanical filter of cleaning and rinsing fluid | 5–200μm |
Spraying pressure–cleaning–without FC | 1,8 Bar |
Spraying pressure–cleaning–with FC | 1,1–2,2 Bar |
Operating pressures frequency converter | 2,4 Bar |
Cleaning fluid flow rate | 210L/min |
Temperature range setting of the cleaning and rinsing fluid | From ambient temperature to 60°C |
Conductivity range settings of the rinsing fluid in the tanks | 0–2000μS/cm optional |
Temperature range setting of the drying | From ambient temperature to 80°C |
Noise level | < 70dB |
Device control | PLC+8,4“ touchscreen |
Volume of the storage tanks | 85L |
| INSTALLATION REQUIREMENTS | |
|---|---|
Pmax | 14 kW |
Compressed air connection | Pipe Ø 6mm, Ø 10mm |
Compressed air quality | 3. Class |
Exhaust pipe diameter | Ø 150mm |
Exhaust pipe capacity | 380m³/h |
Minimum liquid for first run | 2x75L |
Service space required around the device | 600mm |