DCT印刷电路板®888CRRD 2F、PCBA清洗机InJet
设备尺寸(W*D*H): L1400×W1620×H2350mm
设备重量: 795kg
电源要求: AC400V 50Hz 三相5线(3+N+PE)
气源要求: 0.45–0.6MPa
设备简介:丹麦DCT InJet® 888 CRRD-2F 为带预漂洗段的双层全自动闭路清洗机，用于PCBA回流后助焊剂清除，可同时清洗钢网与误印板，装机功率Pmax 16kW。平台型号“InJet® 888 CRRD 2F”官方写法为“InJet® 888 CRRD-2F”。尺寸厂方英文TDS为1620×1400×2350mm、中文译本为1620×1350×2350mm，平台记录1620×1400×2350mm，采信英文原版，中文译本差异待核实。展开更多
设备参数
设备文档
配件清单
设备参数
| TECHNICAL PARAMETERS | |
|---|---|
Ø energy consumption per cycle | 3,3 kWh |
Cleaning and rinsing fluid consumption per cycle | 0,2 – 0,5L |
Compressed air consumption per cycle | 1200L/cycle/4,5 bar |
Max. dimensions of the cleaned parts | 850x800x600mm |
Exchangeable mechanical filter of cleaning and rinsing fluid | 5 – 200μm |
Spraying pressure/45°C/113°F | 2,4 Bar |
Cleaning fluid flow rate | 210L/min |
Temperature range setting of the cleaning and rinsing fluid | From ambient temperature to 60°C |
Conductivity range settings of the rinsing fluid in the tanks | 0–2000μS/cm optional |
Temperature range setting of the drying | From ambient temperature to 80°C |
Noise level | < 70 dB |
Device control | PLC+8,4“ touchscreen |
Volume of storage tanks | 85 L |
| INSTALLATION REQUIREMENTS | |
|---|---|
Pmax | 16 kW |
Compressed air connection | Pipe Ø 6mm |
Compressed air quality | 3. Class |
Exhaust pipe diameter | Ø 150mm |
Exhaust pipe capacity | 580m³/h |
Minimum liquid for first run | 2x75 L |
Service space required around the device | 600 mm |