DCT PCB，PCBA清洗机AirJet ® 486 CRD
设备尺寸(W*D*H): L1080×W1795×H1145mm
设备重量: 300kg
电源要求: AC400V 50Hz 3相(N+PE)
气源要求: 0.2-0.4MPa
设备简介:捷克DCT AirJet 486 CRD 为回流焊炉与波峰焊部件维护清洗机，清洗/漂洗/干燥在三个独立腔体(兼储液槽)中进行，100%闭回路，三腔可同时使用以提升产能、减少交叉污染。据DCT技术规格书(TDS)更正：尺寸1800×1080×1150→1795(宽)×1080(长)×1145(高)mm，重量310Kg→300Kg，气源2-4Bar换算为0.2-0.4MPa。标准配置为手动转篮方案，标签由全自动更正为半自动。展开更多
设备参数
设备文档
配件清单
设备参数
| TECHNICAL PARAMETERS | |
|---|---|
Ø energy consumption per cycle | 1,65 kWh |
Cleaning and rinsing fluid consumption per cycle | 0,05–0,3L |
Compressed air consumption per cycle | 83L/5 Bar |
Max. dimensions of the cleaned parts | 400x800x600mm |
Temperature range setting of the cleaning and rinsing fluid | From ambient temperature to 60°C |
Temperature range setting of the drying | From ambient temperature to 80°C |
Noise level | < 70 dB |
Device control | PLC+4,3“ touchscreen |
Volume of the storage tanks (clean, rinse) | 100L |
| INSTALLATION REQUIREMENTS | |
|---|---|
Pmax | 9,5 kW |
Compressed air connection | Pipe Ø 6 mm |
Recommended working pressure | 2–4 Bar |
Compressed air quality | 3. Class |
Exhaust pipe diameter | Ø 100 mm |
Exhaust pipe capacity | 380m³/h |
Minimum liquid for first run | 2x50L |
Service space required around the device | 600 mm |