DCTAirJet®594CRD-器件/模组清洗机
设备尺寸(W*D*H): L2536×W1636×H2463mm
设备重量: 720kg
电源要求: AC400V, 32A, 50Hz（3+N+PE，三相五线）
气源要求: 0.45-0.6MPa
设备简介:捷克DCT AirJet® 594 CRD-SAC 器件/模组清洗机，SAC即半自动（semi-automatic）三腔方案，用于回焊炉/波峰焊配件维护清洗。尺寸、重量、电源、气源与DCT官方TDS（2021版）完全一致。注意勿与AirJet 594 CRD-SAC CUSTOMLINE定制版混淆（该变体为2630×1730×2475/2870mm、870/900kg）。展开更多
设备参数
设备文档
配件清单
设备参数
| TECHNICAL PARAMETERS | |
|---|---|
Ø energy consumption per cycle | 1,65 kWh |
Cleaning and rinsing fluid consumption per cycle | 0,05 – 0,3L |
Compressed air consumption per cycle | 83L/5 Bar |
Max. dimensions of the cleaned parts | 470x880x600mm |
Dimensions of the carrier basket | 455x855x500mm |
Maximal load of the basket | 50 Kg |
Dimensions of the handling trolley | 570x1354x950mm |
Maximal load of the handling trolley | 50 Kg |
Temperature range setting of the cleaning and rinsing fluid | From ambient temperature to 60°C |
Volume of the storage tanks (clean, rinse) | 200L |
Temperature range setting of the drying | From ambient temperature to 80°C |
Noise level | < 70dB |
Device control | PLC+5,7“ touchscreen |
| INSTALLATION REQUIREMENTS | |
|---|---|
Pmax | 9,5 kW |
Connection to central air
pressure | Pipe Ø 10mm |
Compressed air quality | 3. Class |
Exhaust pipe diameter | Ø 100mm |
Exhaust pipe capacity | 380m³/h |
Minimum liquid for first run | 2x100L |
Service space required around the device | 600 mm |