DCT PCB，PCBA清洗机Sonix ® 355 CRRD
设备尺寸(W*D*H): L1740×W1220×H1210mm
设备重量: 400kg
电源要求: AC400V, 32A, 50Hz（3+N+PE，三相五线）
气源要求: 0.45-0.6MPa
设备简介:捷克DCT Sonix® 355 CRRD PCB/PCBA清洗机，四腔手动方案超音波清洗机，也可"双应用"使用：一腔处理喷涂框架与载具，另一腔处理回流炉/波峰焊零件。尺寸、重量、电源、气源与DCT官方TDS（2021版）一致（4.5-6bar≈0.45-0.6MPa），品牌为DCT（平台未填）。展开更多
设备参数
设备文档
配件清单
设备参数
| TECHNICAL PARAMETERS | |
|---|---|
Ø energy consumption per cycle | 1.92 kWh |
Cleaning and rinsing fluid consumption per cycle | 0,05–0,3L |
Compressed air consumption per cycle | 83L/5Bar |
Dimensions of carrier basket | 270x530x620mm |
Max. dimensions of the cleaned parts | 280x540x630mm |
Temperature range setting
of the cleaning and rinsing fluid | From ambient temperature to 60°C |
Ultrasound frequency | 35 kHz |
Temperature range setting of the drying | From ambient temperature to 80°C |
Noise level | < 70dB |
Device control | PLC+5,7“ touchscreen |
Volume of the storage tanks | 120L |
| INSTALLATION REQUIREMENTS | |
|---|---|
Pmax | 15kW |
Compressed air connection | Pipe Ø 6mm |
Compressed air quality | 3. Class |
Exhaust pipe diameter | Ø 100mm |
Exhaust pipe capacity | 580m³/h |
Minimum liquid for first run | 3x100L |
Service space required around the device | 600 mm |