INERTEC选择性焊接机CUBE.460
设备尺寸(W*D*H): 1430x1550x1250mm
设备重量: 800kg
电源要求: 3x32 A; 3x400V;50Hz;(depends on the configuration 6-14,4 KW)
气源要求: N/A
设备简介:CUBE.460 The new entry-level selective soldering system
设备参数
设备文档
配件清单
| Machine Specification | |
|---|---|
Exhaust opening | Ø150 mm |
Extraction rate | 400m³/h |
| System control | |
|---|---|
Control concept | PC; Beckhoff PLC, incl. PC and accessories |
Interface | Ethernet, USB |
Offline software | Offline software for easy programming |
Axis type | XY-Portal; Z-axis lift; DC Servo motors with encoders; CAN-BUS |
Axis movement | Combination of toothed belts and ball screw |
Repeatability | ±0,15mm (±0,006“) |
Dimensions min / max | 20x20mm/460x460mm(0,8“x0,8“/18“x18”) |
Soldering angle | 0° |
Fluxer type | Micro Drop |
Flux container | 3 litre pressurised pot with level indicator |
Solder pot with the possibility to use a second mini wave module
| Solder volume lead-free (45Kg)/Tin Lead (50Kg) |
Wetted (multi directional) nozzle | Different sizes are available Ø4mm-Ø20mm (0,02“–0,08“) |
Solder temperature / temperature control | Maximum 330°C/via PID sensor |
Solder wave height control | Program controlled |
Nitrogen inerted | N2, 5.0 is recommended, max pressure 5,5 bar |
Nitrogen consumption | Depending on User soldering nozzle 1-3 m3/ hr |
Bottom side clearance / Top side clearance | 30mm(1,2“) /150 mm(6“) |
| Optional | |
|---|---|
USV | Optional |
Camera / Online Software | Camera with cross hair for online programming |
Soldering angle | 0°and7° |
Carrier | Special fixtures available, downholder, etc. |
Flux | Alcohol based with 5% solids recommended |
Spray fluxer | by the use of a wave module |
Type | Quartz Rods |
Power approx. | 5 KW |
Top side preheat | Built into the gripper |
Operation of two small solder pots gives the possibility to use different alloys | Solder volume lead-free(21Kg)/Tin Lead(24Kg) |
Solder pot with a wave module = 200mm | Solder volume lead-free(58Kg)/Tin Lead(66Kg) |
Additional mini wave module | For parallel soldering or in combination with a lift module
different nozzles can be used in one Program |
Additonal nozzle heating | Optimal preheating of the soldering joint with hot gas |
Additional solder nozzles | Different sizes are available Ø4mm-Ø20mm (0,02“–0,08“) |
Solder wire feeder | Motor driven 1,5–2mm (other sizes on request), solder wire max 5kg |
Process Camera | Camera "real time" to view the soldering process |
Trolley and exchangeable soldering aggregate | For the use of different alloys |
Electro-dynamic solder pump | Alternative to a standard rotarydrive pump |
加入供应商
暂无设备