HELLER 氮气回流炉 1936 MK7
设备尺寸(W*D*H): 232" (590cm) x 60” (152cm) x 57” (144cm)
设备重量: 5335 lbs. (2420 kg)
电源要求: 3相 208/240/380/400/415/440/480 VAC 50/60 Hz
气源要求: NA
设备简介:HELLER回流焊1936MK5回流焊炉系列带来更低的使用成本，HELLER回流焊炉再加热和冷却方面的发展，可以为您节省高达40％的耗氮量和耗电量。MK5系列不仅是最佳的回流焊系统，更具有业内最好的综合价值。
设备参数
设备文档
配件清单
| Electric Supply | |
|---|---|
Power Input (3 Phase) Standard | 480 volts |
Breaker Size | 100 amps @ 480v |
kW | 9 - 15 Continuous |
Typical Run Current | 25 - 35 amps @ 480v |
| Computer Control | |
|---|---|
Windows Operating System | Windows 10® Home |
| Inert Atmosphere | |
|---|---|
Minimum PPM Oxygen | 10-25 PPM |
Typical Nitrogen Consumption | 500 - 700 SCFH |
| Mesh Belt Conveyor | |
|---|---|
Height From Floor | 37.5" ± 2.4" (95 cm ± 6 cm) |
Maximum PCB Width | 22" (56 cm) |
Space Required Between PCB's | 0.0" (0.0 cm) |
Conveyor Length On-Load | 3" (7.5 cm) |
Conveyor Length Off-Load | 3" (7.5 cm) |
Heated Tunnel Length | 141" (359 cm) |
Process Clearance Above Mesh Belt | 2.3" (5.8 cm) |
Mesh Belt Pitch | 0.5" (1.27 cm) |
Maximum Conveyor Speed | 74"/Min (188 cm/min.) |
Conveyor Speed Control | Closed Loop |
| Edge Hold Conveyor System Option | |
|---|---|
Height from Floor – Standard | 38.6" ± 2.4" (98 cm ± 6 cm) |
Height from Floor – Optional | 35.4" ± 2.4"(90 cm ± 6 cm) |
Clearance Above & Below Conveyor Pins | 1.15" (2.9 cm) |
Length of PCB Support Pins | 187" (4.75 mm) |
Minimum/Maximum Board Width | 2" - 22" (5 – 56 cm)
24” (61cm) Optional |
| Forced Convection Zones | |
|---|---|
Top & Bottom | 10 |
Heater Type | Instant response open coil |
Heater Material | Nichrome |
Profile Change Time | 5 - 15 minutes |
| Temperature Control | |
|---|---|
Accuracy of Temperature Controller | ±1°C |
Cross-Belt Temperature Tolerance | ±2°C |
Heater Wattage Per Zone | 5400 w |
Temperature Range Standard | 60-350°C |
| Cooling Systems | |
|---|---|
Number of Cooling Zones Standard | 3 |
加入供应商
暂无设备
Copyright ©2025 深圳市五一表面贴装技术有限公司
联系电话：0755-27820151
地址：广东省深圳市宝安区航城大道159号航城创新创业园a1栋510