HELLER 热风回流炉 1809 MKIII
设备尺寸(W*D*H): 4650*1370*1600mm
设备重量: 3500
电源要求: 208/240/380/400/440/415 VAC 50/60 Hz
气源要求: NA
设备简介:在工厂占地空间有限的情况下，1800型号可满足多品种/高产能的要求……，链速可达32英寸(80厘米)/分钟。无论空气或氮气环境下，无论元件分布密度和是否空满载，快速响应时间和精确的温度控制确保工艺的一致性和一致的温度曲线。 展开更多
设备参数
设备文档
配件清单
| Computer Control | |
|---|---|
AMD or Intel Based Computer | S |
Recipe Storage | >500 |
Flat Screen Monitor | S |
Windows Operating System | Windows XP |
Monitor mount | S |
Auto Start Software | S |
Data Logging | S |
Password Protection | S |
LAN Networking | S |
| Mesh Belt Conveyor | |
|---|---|
Height From Floor | 35.5"+2.0"(90 cm土5 cm) |
Maximum PCB Width | 20"(50.8 cm) |
Space Required Between PCB's | 0.0" (0.0 cm) |
Conveyor Length On-Load | 18" (46 cm) |
Conveyor Length Off-Load | 18" (46 cm) |
Heated Tunnel Length | 105"(254 cm) |
Process Clearance Above Mesh Belt | 2.3"(5.8 cm) |
Mesh Belt Pitch | 0.5" (1.27 cm) |
Maximum Conveyor Speed | 74"/Min (188 cm/min.) |
Conveyor Direction Left to Right | S |
Conveyor Speed Control Type | Closed Loop |
| Edge Hold Conveyor Systen Option | |
|---|---|
Height from Floor - Standard | 37.0"土2.0"(94 cm±5 cm) |
Clearance Above Conveyor Pins | 1.15"(2.9 cm) |
Clearance Below Conveyor Pins | 1.15" (2.9 cm) |
Length of PCB Support Pins | 0.187"(4.75 mm) |
Minimum/Maximum Board Width | 2.0"-18" (5-45.7 cm) |
Edge Hold Rail Heaters | Not Required |
Power Width Adjustment | S |
Auto Lubrication System | S |
| Forced Convection Zones | |
|---|---|
Top | 9 |
Bottom | 9 |
Heater Type | Instant response open coil |
Heater Material | Nichrome |
| Temperature Control | |
|---|---|
Accuracy of Temperature Controller | ±.1°C |
Cross-Belt Temperature Tolerance | ±3.0°C |
Heater Wattage Per Zone | 6 KW |
Temperature Range Standard | 25-350°c |
Insulation Type
| Calcium Silicate |
加入供应商
暂无设备
Copyright ©2025 深圳市五一表面贴装技术有限公司
联系电话：0755-27820151
地址：广东省深圳市宝安区航城大道159号航城创新创业园a1栋510