德律 TRI SMT自动光学检查机 TR7500 SIII 3D
设备尺寸(W*D*H): 1100 x 1670 x 1550 mm
设备重量: 1100 x 1670 x 1550 mm
电源要求:
气源要求:
设备简介:TRI绝佳的3D AOI解决方案，提供最快速的多角度PCB检测，搭配蓝光雷射3D真实轮廓测量，对于自动化检测不良现象可达到最大化覆盖率。结合最先进的软体解决方案以及第三代智能化硬体平台，TR7500 SIII 3D可提供稳定且强大的3D 锡点与元件缺陷检测，具备高检测覆盖率与简易编程优点。 • 高速彩色多角度检测，可检测至01005元件 • 高缺陷覆盖率，采用混合式2D+3D检测技术 • 真实3D轮廓量测技术，采用双雷射单位 • 具备自动化资料库与离线编程功能的智能化快速编程介面展开更多
设备参数
设备文档
配件清单
| 参数表 | |
|---|---|
项目 | 规格 |
Imaging Method | Dynamic Imaging with true 3D profile measurement |
Top Camera | 4 Mpix |
Angle Camera | 1.3 Mpix or 6.5 Mpix (factory setting) |
Imaging Resolution | Optical: 10 µm, 15 µm Laser: 10 μm (optional), 20 μm, 50 μm Note: Factory setting |
Lighting | Multi-phase RGB+W LED |
3D Technology | Single/Dual 3D laser sensors |
Max. 3D Range | 20 mm |
Imaging Speed | 4 Mpix@ 10 µm 2D: 60 cm²/sec 4 Mpix@ 15 µm 2D: 120 cm²/sec 4 Mpix@ 10 µm 2D+3D: 27-39 cm²/sec* 4 Mpix@ 15 µm 2D+3D: 40-60 cm²/sec* * Depending on board size and laser resolution |
X-Axis Control | Ballscrew + AC-servo controller |
Y-Axis Control | Ballscrew + AC-servo controller |
Z-Axis Control | N/A |
X-Y Axis Resolution | 1um |
Max PCB Size | TR7500 SIII 3D: 510 x 460 mm* TR7500L SIII 3D: 660 x 460 mm TR7500 SIII 3D DL: 510 x 250 mm x 2 lanes, 510 x 550 mm x 1 lane * The testable PCB size range will vary depending on the configuration of laser probe |
PCB Thickness | 0.6-5 mm |
Max PCB Weight | 3 kg |
Top Clearance | 15 mm/25 mm/48 mm [optional] Note: (1) Laser resolution@ 50 μm is 25 or 48 mm (optional) (2) Laser resolution@ 20 μm is 25 mm (3) Laser resolution@ 10 μm is 15 mm |
Bottom Clearance | 40 mm |
Edge Clearance | 3mm |
Conveyor | Inline Height: 880 – 920 mm * SMEMA Compatible |
Component | Missing Tombstoning Billboarding Polarity Rotation Shift Wrong Marking (OCV) Defective Upside Down Extra Component Foreign Material Lifted Component |
Solder | Excess Solder Insufficient Solder Bridging Through-hole Pins Lifted Lead Golden Finger Scratch/Contamination |
WxDxH | TR7500 SIII 3D: 1100 x 1670 x 1550 mm TR7500L SIII 3D: 1300 x 1630 x 1655 mm TR7500 SIII 3D DL: 1100 x 1770 x 1550 mm Note: not including signal tower, signal tower height 520 mm |
Weight | TR7500 SIII 3D: 1010 kg TR7500L SIII 3D: 1250 kg TR7500 SIII 3D DL: 1150 kg |
加入供应商
暂无设备
Copyright ©2025 深圳市五一表面贴装技术有限公司
联系电话：0755-27820151
地址：广东省深圳市宝安区航城大道159号航城创新创业园b2栋101