诺信ASYMTEK/诺森UV胶水固化炉UV-9

设备尺寸(W*D*H): L1400×W1200×H1526mm（含警示灯高2086mm）

设备重量: 250kg（单面固化配置，双面约580kg）

电源要求: 三相 AC400V（可选480V），单面固化6.5kW / 双面12.5kW

气源要求:

设备简介:美国诺信（Nordson ASYMTEK）Select Cure UV-9在线式紫外固化炉，用于三防漆涂覆与点胶后的上下面UV固化，弧光灯横跨炉宽保证照度均匀，配排风散热与SMEMA链式传送（5mm销），可选闭环UV功率监控。平台电压“3x400/230V”与原厂不符，原厂为三相AC400V（可选480V）；炉内无气源需求，仅选配进出料遮光门时需6bar压缩空气。展开更多

设备参数

设备文档

配件清单

Conveyor
Type	Chain conveyor with 5mm pins
Component clearance	100 mm top and bottom
Conveyor height	920 to 1000 mm
Conveyor speed	300 to 1500 mm/min
Conveyor width	50 to 420 mm
Conveyor length	1400 mm
Maximum load	4Kg/m

Exhaust/Ventilation
10.83 m3/min @ 40 mm WC, 250 mm exhaust duct (382.5 SCFM @ 1.57 in. WC, 10 in. exhaust duct)

Lamp
Focal Length	100 mm
Length (board width)	Optimized for 420 mm
Power	100 W/cm
Lamp Options	• Standard = Mercury-doped lamp (optimized for UVC) • Mercury-Iron (rich in UVA) • Mercury-Gallium (broadband output along all wavelengths) • Others available upon request

General
Noise level	68 dB @ 1 m

Facilities Requirements
	Single sided	Double sided
Voltage	400 V AC	400 V AC
Phases	3	3
Mode	N+EARTH, TT or TN	N+EARTH, TT or TN
Power rating	7.5 KW	14 KW

Options
Options	1.Close-loop UVA lamp regulation 2.Traffic control 3.Board counter 4.Board jam detection (entry and exit) 5.Automatic width adjust for conveyors 6.Right to left conveyor direction 7.Heavy-duty conveyor: 8Kg/m (5.38 lbs/ft) evenly distributed Reduces maximum conveyor width to 400 mm (1.3 ft) 9.Traceability software 10.Entrance conveyor covered extension 11.Exit conveyor covered extension 12.Recipes and data log storage 13.Touch screen for oven monitoring and control 14.Special paint 15.Dual-lane conveyor 16.Iron-doped lamp 17.Gallium-doped lamp 18.Power packs for different power configurations 19.Inlet and outlet shutters (air supply required) 20.220 mm lamp (140W/cm) 21.220 mm lamp (200W/cm)

Options

1.Close-loop UVA lamp regulation 2.Traffic control 3.Board counter 4.Board jam detection (entry and exit) 5.Automatic width adjust for conveyors 6.Right to left conveyor direction 7.Heavy-duty conveyor: 8Kg/m (5.38 lbs/ft) evenly distributed Reduces maximum conveyor width to 400 mm (1.3 ft) 9.Traceability software 10.Entrance conveyor covered extension 11.Exit conveyor covered extension 12.Recipes and data log storage 13.Touch screen for oven monitoring and control 14.Special paint 15.Dual-lane conveyor 16.Iron-doped lamp 17.Gallium-doped lamp 18.Power packs for different power configurations 19.Inlet and outlet shutters (air supply required) 20.220 mm lamp (140W/cm) 21.220 mm lamp (200W/cm)