埃莎 Kurtz Ersa 选择性焊锡机 VERSAFLOW 3/45

设备尺寸(W*D*H): 2450mmx1730mmx1620mm

设备重量: 1100kg

电源要求: 5-wire system, 3 x 230/400 V, N, PE

气源要求: 6 bar / 87 PSI

设备简介:The VERSAFLOW 3/45 encompasses a new modular machine platform which offers significant floor space area savings when compared to the previous VERSAFLOW machines. An in-line selective solder machine has three basic functional modules: flux, preheat and solder. Depending on the job & throughput requirements, additional solder pots, fluxers and/or preheat modules can be added to the machine after initial installation. This means that your VERSAFLOW 3 machine can grow with your business.展开更多

Conveyor system
Type	segmented pin & chain/roller conveyor for PCB transport without solder frame
Conveyor angle	0° fixed
PCB width (single track)	63.5mm – 406 mm
PCB width (dual track)	2 x 60mm – 208 mm
PCB length	127mm – 508 mm
PCB top side clearance	max. 120 mm (measured from PCB bottom side)
PCB bottom side clearance	max. 60 mm (subject to the soldering joint position)
Clearance from PCB edge	3 mm
Conveyor height from floor	850/950 mm ± 25 mm
Conveyor speed	0.2 – 10 m/min
Mask / PCB weight	max. 5 kg

Flux module
Type	high-precision spray fluxer
Positioning system	2-axis (X/Y), servomotor driven
Flux storage tank	2 L
Positioning speed	2mm – 400 mm/sec
Fluxer speed	2 mm– 20 mm/sec
Positioning accuracy	± 0.25 mm
Spray width	2mm – 8 mm (130 / 270 µm inner nozzle)

Solder module
Type	stainless steel solder pot, integrated in a 3-axis positioning system (X/Y/Z), servomotor driven
Solder nozzle	single-point high-precision solder wave
Smallest nozzle diameter	OD ø 4,5 mm (further nozzles on request)
Solder wave height	max. 5 mm
Clearance from PCB edge	min. 3 mm
Solder volume	~ 11 kg / 24.3 lb (Sn63Pb); ~ 10 kg / 22 lb lead-free
Solder temperature	max. 330 °C
Warm-up time	75 Min
Positioning speed	X/Y: 2 – 200 mm/sec; Z: 2 – 100 mm/sec
Soldering speed	2mm – 100 mm/sec
Positioning accuracy	± 0.15 mm

Preheat module
Type	Bottom side heating with short wave length IR heaters
Power	max. 12 kW
Temperature rang	0 – 200 °C

Nitrogen technology
Nitrogen supply	to be supplied locally
Nitrogen injection	N2-cover over the solder bath
Required pressure	3 bar / 43.5 PSI
N2-consumption	approx. 1.5 m3/h / 2 yd³/h
Required particle cleanliness	5.0 on average

Pneumatic system
Compressed air supply	to be supplied locally
Required pressure	6 bar / 87 PSI
Consumption	< 5 m3/h / 6.5 yd³/h

Elecrial data
Power	5-wire system, 3 x 230/400 V, N, PE
Power tolerance range	+6 %, -10 %
Frequency	50 / 60 Hz
Power consumption	max. 18 kW (basic machine)
Amperage	max. 34 A (basic machine)
Max. fuse rating	3 x 80 A (slow blow) (basic machine)

Exhaust rating
Exhaust rating	approx. 150 m3/h / 196.2 yd³/h
Exhaust stack	2 stacks, 150 mm / 5.9” O.D. each

Environmental specifications
Ambient temperature	0 – 30 °C / 0 – 86 °F
Noise leve	permanent sound level: < 60 dB (A)