GETECH PCB贴标机 SALP
设备尺寸(W*D*H): 1084 mm x 1200 mm x 1846 mm
设备重量: 650kg
电源要求: 380-480V
气源要求: 0.5±0.05Mpa
设备简介:SCARA Auto Auto Auto Label Label Label Placer Placer Placer machine is a high speed in-line automated labeling system specially designed to transfer preprinted labels from Auto label feeder to the PCB panel with minimal operator participation. SALP utilizes SCARA (4axis robot) with a dual vacuum head to perform highspeed and highaccuracy label placing. It incorporates two-stage conveyor assembly with automatic width adjustment to transport different sizes of PCB.展开更多
设备参数
设备文档
配件清单
| 参数 | |
|---|---|
Design | SCARA (4 axis robot) |
Repeatability | +/- 0.02 mm |
Reach | 700 Horizontal, 200 mm Vertical |
End Effector | Dual vacuum pick up head, Product-specific |
Video camera | High-Resolution CCD video camera
PCB Fiducial capturing (Optional) |
Supported Interfaces | RS232C and USB1.1 |
Barcode Type | 1D, 2D, Datamatrix, QR |
Panel Size (mm) | Max. 400 mm x 430 mm
Min. 70 mm x 70 mm |
Panel Thickness | 0.5 mm – 4.0 mm |
Edge Clearance | 4 mm |
Max Payload | 1.5 Kg |
Feeder Base Capacity | 12 Slots |
Drive Method | Belt-drive transportation by induction motors |
Conveyor Direction | Left to Right (default) |
Conveyor Width | Automatic product-specific width adjustment (70mm~430mm) |
Communication | SMEMA |
Production Run | Label Verification Result (Pass/Fail Countdown)
Process and Cycle time Calculation
Output per hour |
Safety Feature | "E" Stops and Enclosed work area with safety doors |
加入供应商
暂无设备
Copyright ©2025 深圳市五一表面贴装技术有限公司
联系电话：15219506010
地址：广东省深圳市宝安区航城大道159号航城创新创业园B2栋101