00193368-02

英文名: SIPLACE V503.02英文版

中文名: SIPLACE V503.02英文版

韩文名:

日文名:

材质: 暂无信息

规格:

单位: 1

相关文档

相关设备

00193368-02.pdf

.: 00193368-02Release status : final

操作手册

00193368-02.pdf

SIPLACE GEM for S25HM, S27HM, HS50, HS60 SW Ve1ion GEM 503.02HOST Interface Manual©Sieme1 AG, all rights reserved page 157 of 243VID Class Format Name and DescriptionOnly valid after width has been measured or adjustedby line computerMatrix Tray Changer (MTC)812002 SV L MTCINFO valid for all MTC Events >If you have several MTCs you can identify a MTC byMTC_number. A MTC has 2 towe1 (1,2) and on everytower there are several carrier modules. A carriermodule contai1 several tray carrie1. Each tray carriercan be identified by a level number. A tray carrierco1ists of many divisio1, wich can be identified bythe division number.Filling_level is only valid with the EventMTCfillLevelChanged.In case of the Event MTCfillLevelChangedcarrier_modul will be -1.Barcode912002 SV A BCININPUTCONVEYORBarcode read from PCB in input conveyor. If nobarcode reader is i1talled in SIPLACE this variablewill contain an empty textAn empty text indicates an error.912003 DV A COMPONENTBARCODEComponent barcode is read by the GUI.An empty text indicates an error or barcode is read byMobile Verifier912004 DV U2 WAYOFINPUTCOMPONENTBARCODEWay of reading the component barcode:1: with keyboard2: with barcode reader3: no barcode readIs not valid for Mobile Verifier912005 SV U2 PCBSIDEININPUTCONVEYORSide of the PCB showing the barcode (only valid incase of two barcode reader per conveyor)

操作手册

00193368-02.pdf

SIPLACE GEM for S25HM, S27HM, HS50 , HS60 SW Ve1ion GEM 503.02HOST Interface ManualPage 158 of 243 ©Sieme1 AG, all rights reservedVID Class Format Name and Description1: above2: down3: barcode reader manufctured by LEUTZE in use orthe barcode could not be read912012 SV A BCINTWININPUTCONVEYORBarcode read from PCB in twin input conveyor. If nobarcode reader is i1talled in SIPLACE this variablewill contain an empty text.An empty text indicates an error.912015 SV U2 PCBSIDEINTWININPUTCONVEYORSide of the PCB showing the barcode (only valid incase of two barcode reader per conveyor)1: above2: down3: barcode reader manufctured by LEUTZE in use orthe barcode could not be read912017 EC U1 BCREADEREXISTUnables/Enables the event messages of the BCreadand BCTwinRead events.0: No BCread and BCTwinRead events send1: BCread and BCTwinRead events send (default)GEM-Kernel1002001 DV A GEMEVENTTEXT.The equipment will set this string to contain adescription of the most recent event. The Host caninclude this variable in any event report it defines.Communication Model1002002 EC U1 INITCOMMSTATE.Initial (power-up) Communicatio1 State.0 = Disabled1 = Enabled1002003 EC U2 ESTABLISHCOMMUNICATIONSTIMER.Time in seconds of how long the equipment will pauseafter an u1uccessful Connect Request beforesending another. Valid values are 0-32000.s1002004 EC U1 CONFIGCONNECT.An EC which controls which SECS message thisEquipment will use for Connect Request.0 = S1F11 = S1F652 = S1F13

操作手册

00193368-02.pdf

SIPLACE GEM for S25HM, S27HM, HS50, HS60 SW Ve1ion GEM 503.02HOST Interface Manual©Sieme1 AG, all rights reserved page 159 of 243VID Class Format Name and DescriptionControl State Model1002005 EC U1 INITCONTROLSTATE.Initial (power-up) control supe1tate.1 = Off-Line2 = On-Line1002006 SV U1 CONTROLSTATE.The current Control State.1 = Off-Line/Equipment Off-Line2 = Off-Line/Attempt On-Line3 = Off-Line/Host Off-Line4 = On-Line/Local5 = On-Line/Remote1002007 SV U1 PREVIOUSCONTROLSTATE.The Control State in effect before the most recenttra1ition to the current Control State.1 = Off-Line/Equipment Off-Line2 = Off-Line/Attempt On-Line3 = Off-Line/Host Off-Line4 = On-Line/Local5 = On-Line/Remote1002008 EC U1 ONLINEFAILED.The default Control State tra1ition when Attempt On-Line fails.1 = Equipment Off-Line3 = Host Off-Line1002009 EC U1 ONLINESUBSTATE.The default (power-up) online substate of the ControlState Model.4 = Local5 = Remote1002010 EC U1 OFFLINESUBSTATE.The default (power-up) offline substate of the ControlState Model.1 = Equipment Off-Line2 = Attempt On-Line3 = Host Off-Line1002056 SV A OPERATORCMDINRMOTESTATEThe last command issued by the Operator while theControl state is „Remote“.An empty text indicates that there was no operatorcommand in remote state since the last start of the

操作手册

00193368-02.pdf

SIPLACE GEM for S25HM, S27HM, HS50 , HS60 SW Ve1ion GEM 503.02HOST Interface ManualPage 160 of 243 ©Sieme1 AG, all rights reservedVID Class Format Name and DescriptionSIPLACE.1002057 SV U1 CONTROLMODEThe actual control mode at the SIPLCAE. This SVindicates which software system is allowed todownload placement programs.1 = none2 = the „GEM-Host“3 = the line computer (LCU)Process State Model1002011 SV U1 PROCESSSTATE.The current Process State.0 = Machine Initialization1 = Single Function2 = Processing1002012 SV U1 PREVIOUSPROCESSSTATE.The Process State in effect before the most recenttra1ition to the current Process State.0 = Machine initialization1 = Single Function2 = ProcessingAlarm Management1002013 SV U4 ALARMID.The ALID of the most recent Alarm tra1ition.1002014 SV U1 ALARMSTATE.The Alarm State now in effect for the most recentlytra1itioned alarm.0 = Alarm tra1itioned OFF1 = Alarm tra1itioned ON1002015 SV U4 ALARMSERIAL.The sequence number of the most recent alarmchange (going on or going off). This number starts atzero at power-up and increments by one for eachalarm tra1ition which occu1.1002016 DV A[0-40] ALARMTEXT.The Alarm Text (ALTX) for the most recentlytra1itioned Alarm.1002018 EC U1 CONFIGALARMS.An EC which controls which Alarm Report messagethis Equipment will send.

操作手册

00193368-02.pdf

SIPLACE GEM for S25HM, S27HM, HS50, HS60 SW Ve1ion GEM 503.02HOST Interface Manual©Sieme1 AG, all rights reserved page 161 of 243VID Class Format Name and Description0 = S5F11 = S5F712 = S5F731002019 EC U1 WBITS5.An EC which controls the W-Bit setting used whe1ending Alarm Reports (S5F1, S5F71, or S5F73).0 = W-Bit not set1 = W-Bit set1002020 SV L ALARMSENABLED.A list of all Alarms which are currently enabled.Format as follows:...>1002021 SV L ALARMSSET.A list of all Alarms which are currently in the SET (on)state. Format as follows:...>Time and date1002022 SV A CLOCK.The Equipment's current Date and Time in thefollowing format: YYYYMMDDhhmmsscc. YYYY = year MM = month DD = day hh = hou1 mm = minutes ss = seconds cc = centiseconds1002023 SV A TIME.The Equipment's current date and time. Format isdescribed in the variable GEMTIMEFORMAT (VID1002065). It may be eitherYYYYMMDDhhmmsscc OR YYMMDDhhmmss YY(YY) = year MM = month

操作手册

00193368-02.pdf

SIPLACE GEM for S25HM, S27HM, HS50 , HS60 SW Ve1ion GEM 503.02HOST Interface ManualPage 162 of 243 ©Sieme1 AG, all rights reservedVID Class Format Name and Description DD = day hh = hou1 mm = minutes ss = seconds (cc = centiseconds)Terminal Service1002034 EC U1 WBITS10.An EC which controls the W-Bit setting used whe1ending S10F1.0 = W-Bit not set1 = W-Bit setData Collection1002030 SV U4 PREVIOUSCEID.The CEID of the most recent Collection event whichhas occurred.1002031 EC BOOL RPTYPE.This EC controls some aspects of the format of EventReports sent by this Equipment.FALSE = Normal Event ReportsTRUE = Annotated Event Reports1002032 EC U1 CONFIGEVENTS.An EC which controls some aspects of the EventReports sent by this Equipment.0 = S6F9 or S6F31 = S6F11 or S6F131002033 EC U1 WBITS6.An EC which controls the W-Bit setting used whe1ending stream six messages (events, trace)0 = W-Bit not set1 = W-Bit set1002035 SV L EVENTSENABLED.A list of all Events which are currently enabled.Format as follows:...>1002036 DV U4 ECIDCHANGE.The VID of the Equipment Co1tant most recently

操作手册

00193368-02.pdf

SIPLACE GEM for S25HM, S27HM, HS50, HS60 SW Ve1ion GEM 503.02HOST Interface Manual©Sieme1 AG, all rights reserved page 163 of 243VID Class Format Name and Descriptionchanged by the Operator.Spooling1002037 EC U4 MAXSPOOLTRANSMIT.The maximum number of spooled messages theequipment will send each time the Host reads thespool. A setting of zero indicates that all spooledmessages should be sent. Refer to the description ofS6F23 in the "SECS Message Detail" section forfurther information.1002038 SV U4 SPOOLCOUNTACTUAL.A count of the number of messages actually presenton the spool disk, adjusted for any messages whichhave been overwritten or otherwise discarded.1002039 SV U4 SPOOLCOUNTTOTAL.A count of the number of messages the equipmentattempted to write to the spool disk. This numberincludes messages actually present on the spool disk,and also any messages which may have beenoverwritten or otherwise discarded.1002040 SV A[16] SPOOLFULLTIME.The date and time at which the spool file became full.Format is: YYYYMMDDhhmmsscc. See descriptionof CLOCK variable above for format details.1002041 SV U1 SPOOLLOADSUBSTATE.The current state within the SPOOL LOAD super-state.6 = Spool Not Full7 = Spool Full1002042 SV A[16] SPOOLSTARTTIME.The date and time at which the fi1t message waswritten to the current spool file. Format is:YYYYMMDDhhmmsscc.See description of CLOCK variable above for formatdetails.1002043 SV U1 SPOOLSTATE.The current spool state within the POWER ON super-state.1 = Spool Inactive2 = Spool Active1002044 SV U1 SPOOLUNLOADSUBSTATE.The current spool state within the SPOOL UNLOADsuper-state.3 = Purge Spool4 = Tra1mit Spool5 = No Spool

操作手册

00193368-02.pdf

SIPLACE GEM for S25HM, S27HM, HS50 , HS60 SW Ve1ion GEM 503.02HOST Interface ManualPage 164 of 243 ©Sieme1 AG, all rights reservedVID Class Format Name and Description1002045 EC U1 CONFIGSPOOL.This EC determines whether spooling is enabled ordisabled for this Equipment.0 = Disabled1 = Enabled1002046 EC BOOL OVERWRITESPOOL.This EC determines the action to be taken by theEquipment when the Spool file reaches its capacity.TRUE = Overwrite SpoolFALSE = Do Not Overwrite SpoolLimit Monitoring1002047 DV U4 GEMLIMITSVID.The VID relating to the most recent Limits Monitoringtra1ition event which occurred.1002048 DV B[1] GEMEVENTLIMIT.The LIMITID relating to the most recent LimitsMonitoring tra1ition event which occurred.1002049 DV B[1] GEMTRANSTYPE.Tra1ition type relating to the most recent LimitsMonitoring tra1ition which occurred.0x00 = Lower -> Upper0x01 = Upper -> Lower1002050 EC U2 GEMLIMITSTIMER.The time in seconds this equipment will pausesbetween checking for Limits Monitoring tra1itio1On-Line Identification1002051 SV A[6] MDLN.Model number. „HS50„ , „HS5r„ or „S25„ , „S25HM„“S27HM”, “HS60”1002052 SV A[6] SOFTREV.Software revision number. "503.xx"Miscellaneous1002054 SV A SOFTWAREREVTABLERevision of feeder table software - After startup this isthe revision number of the fi1t table. Will be updatedwith every event TableDownload (2010008).1002055 EC U2 HEARTBEAT.The time in seconds that the Equipment will pausebefore sending S1F1 to test the link. Units areseconds. Valid values are 0-3200 (a setting of zerowill disable the heartbeat).1002065 EC U1 GEMTIMEFORMAT

操作手册

00193368-02.pdf

SIPLACE GEM for S25HM, S27HM, HS50, HS60 SW Ve1ion GEM 503.02HOST Interface Manual©Sieme1 AG, all rights reserved page 165 of 243VID Class Format Name and DescriptionFormat of TIME (VID 1002023)0: 12 digits1: 16 digits (Year 2000 compliant)1002067 SV A[30] SOFTWAREREVGEMGEM Software revision number. "503.xx"1002068 EC A[10] NICKNAMEDefault value is "SIPLACE"Can be overwritten with an individual name for eachmachine.1002069 SV I8 LASTERRORCODEIf the General Error Event FM_GENERAL is used, thisVariable contai1 the Error Code. The Error Code isidentical to the CEID of the specific Error Event.Example:A barcode reading error can be reported with theEventCEID 920001 FM_LP_BC_NOKor with the General Error EventCEID 1001024 FM_GENERAL and the VariablesVID 1002069 LASTERRORCODE = 920001 andVID 1002070 LASTFMTEXT = "FM_LP_BC_NOK"1002070 SV A LASTFMTEXTError Text of the last specific Error Event. For adetailed description see LASTERRORCODE1002071 SV A SOFTWAREREVMTCSoftware revision of the Matrix Tray ChangerOnly valid after a download of the MTC firmware.Process Program Management1002080 SV A CURRENTSETUPName of current setup loaded in machineAn empty text indicates an error.1002081 SV A FIRSTCURRENTPLACEPROGRAMName of current placement program loaded inmachine for Processing 1 Area.This data item will be set when a new ProcessProgram is downloaded to a SIPLACE machine for thecorresponding processing area and a PCB reachesthe corresponding processing conveyor:An empty text indicates an error.

操作手册